- Регистрация
- 10 Окт 2006
- Сообщения
- 7,845
- Реакции
- 0
- Баллы
- 36
- Адрес
- Одесса, UA
- Веб-сайт
- www.xtremegarage.od.ua
Using a micrometer, measure disc thickness at
eight positions, approximately 45 degrees apart
and 10 mm from the outer edge of the disc.
Standard value:
<Front> 32.0 mm
<Rear> 22.0 mm
Minimum limit:
<Front> 29.8 mm
<Rear> 20.4 mm
NOTE: Thickness variation (at least 8 positions)
should not be more than 0.015 mm.
eight positions, approximately 45 degrees apart
and 10 mm from the outer edge of the disc.
Standard value:
<Front> 32.0 mm
<Rear> 22.0 mm
Minimum limit:
<Front> 29.8 mm
<Rear> 20.4 mm
NOTE: Thickness variation (at least 8 positions)
should not be more than 0.015 mm.
